If you’re looking for some handmade gift ideas, I’ve got one you might like. You see, few things in life are more helpful than a notepad. This is true for everyone, even tech savvy folks like me. While phones and digital note taking software are nice to have, there are times when you just need a to write a quick note or list. This handmade notepad is just for these occasions.

Imagine your gift recipient’s face when you give them this adorable tear away notepad with matching protective cover. Even if they don’t usually write notes, I’m guessing they’ll love the heck out of it because you made it with your own two hands. Handmade gifts = lots of love.

While I’m creating this as a valentines day gift, feel free to use any theme you want. Get creative!

Note: There is no sewing in this tutorial, but it assumes you know how to make a notepad using the perfect binding method.

Bookbinding Tutorial: Handmade Love Notes Pad with Cover

Measurements: Case (closed: 8-3/4″h x 3-1/2″w, open: 8-3/4″h x 7-1/2″), Notepad (8-1/4″h x 3-1/4″w)

Cost Level: $

Skill Level: Intermediate

Total Time: 90 minutes + drying time

Handmade Love Notes Pad with Cover Materials:

  • One cover sheet for the outside of the cover, cut to 9.75”h x 8.5”w
  • Two pieces bookboard or cardboard at least 1/16″ thick, cut to 8.75”h x 3.5”w
  • One inner cover sheet of cardstock or construction paper in any color, cut to 8.5”h x 7-3/8”w
  • a single piece of cardboard for notepad backing at least 1/16″ thick, cut to 8.25”h x 3.25”w
  • One stack of paper 3/16” thick, perfect bound (~35 sheets of 70lb text weight paper), cut to 8-1/4″h x 3-1/4″w
  • a piece of paper to secure the backing to the notepad, cut to 3.25”w x 2.25”h
  • one tall pocket sheet cut to 6.75”h x 3.5”w
  • one short pocket sheet cut to 4.75”h x 3-3/8”w
  • Extras to decorate the front, inside, etc.
various materials needed to make a handmade love notes pad, including 12x12 stampin up from my heart specialty decorative card stock, construction paper

Tools & Supplies:

Needed:

  • Bone folder
  • Olfa knife
  • Scissors
  • 12” ruler
  • 1-3/8″ round paste brush or similar
  • 1/2″ to 3/4″ small paste brush or similar
  • PVA or Elmer’s glue
  • Clamps or two 1/2″ to 3/4″ binder clips
  • Strong double sided adhesive tape

Nice to Have:

  • Score board (I use a Scor-Pal)
  • Scoring tool (can also use a bone folder)
  • Corner guide or jig
  • 1/4” and 1/2” steel rules or spacers
tools to make this project which is a handmade love notes pad including bone folder olfa knife clamps score pal board scissors pva paste brushes and double sided tape

Steps:

*These steps assume everything has been cut to size according to the materials list above.

Create the notepad

  1. Create the notepad for this project using the Perfect Binding method.
  2. Use the small piece of decorative paper to adhere the paper of your notepad to the cardboard backing.

    Here is what mine looks like:
The pad should be 3/16″ before the backing
With the backing, it should be 1/4″ thick
Backing should be adhered, but lift easily

Prepare the tall pocket

  1. Hold the tall pocket piece of paper so it is vertical.
  2. Score a line 1/4″ wide on the right and bottom sides.
  3. Gently pre-fold these lines until a small square appears in the bottom right corner.
  4. Using scissors, cut away this small square.
  5. Optional: Fold the top left corner into a triangle-shaped flap. Use double sided tape to hold the flap closed.
Score 1/4″ on right and bottom
Fold the scored lines
A square will form in the bottom right corner
Go ahead and cut away this square
Optional: fold the top left flap into a half triangle

Prepare the short pocket

  1. Hold the short pocket piece of paper so it is vertical.
  2. Score a line 1/8″ wide on the left and bottom sides.
  3. Gently pre-fold these lines until a small square appears in the bottom right corner.
  4. Using scissors, cut away this small square.
  5. Optional: Fold the top right corner into a triangle-shaped flap. Use double sided tape to hold the flap closed.
Score 1/8″ on left and bottom, fold
various images showing the steps to prepare the short pocket for this handmade love notes pad
Optional: fold over the top right corner and tape into place

Attach the pockets to the inner cover sheet

Here’s how we want this to end up (front view on the left, back view on the right):

two images showing first the back of the inner cover sheet with pockets wrapped around and front so you can see how the pockets will look
Finished front of inner cover sheet
Finished back of inner cover sheet

To create the above, follow these steps:

  1. Slide the short pocket onto the bottom left of the inner cover sheet and wrap the folded lines around the corner.
  2. Slide the tall pocket onto the bottom right of the inner cover sheet and wrap the folded lines around the corner.
  3. Flip the inner cover sheet over so the back is facing up.
  4. Notice the short pocket edges are overlapping with one another. Using a scissor, trim away the small bit that overlaps. This is optional, but recommended.
  5. Repeat this process with the tall pocket on the right. Trim away the small bit that overlaps.
  6. Using double sided tape, adhere the short pocket folds to the inner cover sheet.
  7. Repeat this process with the tall pocket folds.
  8. At this point, both pockets should be adhered to the inner cover sheet. Set aside.
Test fit the left pocket first
two images, the first showing the left pocket being fit to the inner sheet and the second showing the right pocket being fit
Test the right pocket next
Wrap the pocket around the inner sheet, then turn over so it looks like this
Notice how the flaps overlap?
Cut away that small bit of excess so they no longer overlap
Taping the small pocket
Taping the tall pocket
Finish by smoothing each with your bone folder

Prepare the cover

**If you have any trouble or need to learn how to do these steps, check out Tutorial | How to Create a Casebinding (Part II). It includes full instructions on how to glue down the boards, measure and cut corners and glue the flaps.

Part I

  1. Score a line 1/2″ in from each side (left, right, top and bottom).
  2. Score a line 4″ in from the left. This starts the spine area.
  3. Score a line 4-1/2″ in from the left. This ends the spine area. The spine should be 1/2″ wide and sit between the two boards.
  4. Lay the book boards in their respective places, which should be easy to see now that you’ve scored these lines:
After scoring, your cover sheet should look like this
The two boards will fit inside the scored lines

Part II

  1. Using PVA, glue the boards into place one at a time. Be sure to press firmly and use a bone folder to smooth out any air bubbles on each side.
  2. Once the boards are glued into place, mark and cut the four corners.
  3. Glue the top and bottom flaps first, using care to smooth each flap with a bone folder. This removes air and excess PVA.
  4. Use the rounded edge of a bone folder to gently define the spine hinges. Be careful not to tear the paper while it’s wet.
  5. Glue the right and left flaps next, repeating the smoothing process as you go along. Use care to turn in each corner with the pointed end of your bone folder.
  6. Once all flaps are turned in, press the case under several large books for 15-20 minutes. Be sure to sandwich the case between two sheets of waste paper (regular printer paper works here), which will absorb extra moisture.
Add PVA to the first board
Lay it down within the scored lines
Smooth out any air bubbles
Repeat with the second board
Use a 1/2″ spacer when laying down the second board to maintain the spine width
Use the rounded edge of a bone folder to smooth and define spine hinges
Mark all four corners
Cut away excess around corners
Glue the top and bottom first
Be sure to smooth with your fingers
Carefully define the hinges with a bone folder
Glue the left and right edges
Use the pointed end of a bone folder to turn in the corners

Add the inner cover sheet (completed with pockets in place) to the completed cover

  1. Lay the cover down so the side with visible boards is facing up.
  2. Before adding any glue, be sure to lay the inner cover sheet over the boards to confirm it will fit properly.
  3. Once you’re comfortable with the final placement, set the cover aside and turn the inner sheet over so the pockets are face down on a waste paper sheet spread over the work area.
  4. Using a large brush, apply a thin layer of PVA to the back of the inner cover sheet starting from the center and working your way outward. *Note: PVA mixed with Methyl Cellulose will make this step much easier, but it is not required.
  5. Lay the inner cover sheet glue-side down onto the cover in the position you determined in step #2.
  6. Before smoothing anything, be sure to press the inner cover into the spine using the pad of your finger(s). This is the easiest way to be sure the spine has fluid movement before the rest of the sheet fully adheres.
  7. Carefully turn up the front and back cover while working to define the hinges.
  8. Using a bone folder, smooth out the rest of the inner sheet and pockets to remove bubbles and extra air.
  9. Slide a sheet of waste paper under the cover and another sheet between the inner cover and pockets.
  10. Place 2-3 large books on top of the cover and let it rest for up to 24 hours (longer is better).
Stage the inner sheet with pockets over the cover to be sure it will fit
Add PVA to the back of the inner sheet
Press the inner sheet into the cover at the spine first using finger pads
Use a bone folder to carefully define hinges
Continue defining while smoothing out any bubbles
Lift the front cover to be sure it bends
Smooth while lifting covers to define hinges before glue sets
various images showing how to adhere the inner cover sheet with pockets to the outer cover
All done!

Decorate your new notepad + cover!

I chose a Valentine’s Day theme for this book, but when it comes to handmade gift ideas, this little notepad + cover duo offers some powerful customization options. For example, use Holiday themed paper to make a stocking stuffer, or beautiful florals to impress a gardening friend. Whatever you need, this book can be. I think that’s why I love it so much!

Use up that craft fodder!

I had this big ol’ stack of scraps from last year’s Valentine’s Day card making marathon, so I put it to good use here. If you have a bin of extras to use up, this might just be the perfect time to do so!

Scraps to be used up!
Make some cute embellishments!
photo of a stack of paper scraps, another stack of die cuts and stamped images and a final image of the finished product
Finished Handmade Love Notes Pad + Matching Reusable Cover
Reusable covers are the bomb!
Here’s the finished cover + notepad
three images showing the empty cover without a notepad, the cover with the front of the notepad and the cover with the back of the notepad
…and this is the back of the notepad so you can see the matching paper

Video: How to Make a Cute Love Notes Pad with Matching Reusable Cover

Resources

Learn all about the Perfect Binding Method

Perfect Binding tutorials:

Case making techniques + videos:

Methyl Cellulose + PVA:

Want more tutorials and info? Be sure to join my mailing list. Subscribers get access to new tutorials before anyone else!

If you haven’t already, grab my Bookbinding Tools & Supplies Quick Start Guide to learn about these tools, which to buy first and where to go online.

Thanks for checking out this fun tutorial. I hope it gave you some inspiration for your own handmade gift ideas. Stop by Instagram & Facebook to show me what you made!

ALL my best,

Misty